Four Fronts, One Back: Making Photocards on Your Phone
Making a double-sided photocard on a phone involves three separate choices: what appears on each side, how many copies to print, and how many configured sets to buy. Keep those choices separate and the order becomes much easier to check.
The illustrated mobile editor is for Picsqueen’s Glossy Photocard. We will plan four different fronts, one common back and five copies of each design: twenty physical cards. The screen examples include a different batch with seven designs; the same controls apply to our four-front plan. Check the current product options and charges when ordering, since the interface and prices can change. Other products can use different editors.
Plan twenty cards before opening the editor
Put four front photos and a shared-back file in an easy-to-find phone folder. Call them A, B, C, D and shared-back so you can tell them apart when thumbnails are small. Choose clear files with room around important details, and retain existing creator credits.
Write down A × 5, B × 5, C × 5 and D × 5. That is four front designs, five artwork files in total and twenty finished cards. You do not need twenty different photos. The current Glossy product page displays quantity choices in multiples of twenty; follow the requirements shown for the version you select. For a larger project, use the freebie quantity planner before adding more designs.
Open the product and upload the fronts
In the illustrated flow, tap Customize on the product page, check the size and corner choices, then tap Start Customizing. The demonstrated card is 54 × 86 mm. Here, Square means straight corners on that rectangular card; Rounded means rounded corners.
Tap Click to Upload, read the upload guidance, tap Upload in that panel and choose your front files from the phone photo library. Allow the upload to finish. If one file reports an error, address that file before treating the full list as ready.

Open a card’s Front and Back after upload. In the illustrated editor, the uploaded picture initially appears on both sides. A common back is something you apply deliberately, rather than something the editor infers from your filenames.
Finish the front before repeating it
Tap Click to Edit and select the front. The illustrated controls use a pinch with thumb and index finger to resize and a one-finger drag to position. Make small changes and inspect the safety guides. Look beyond the face: hair, hands, props and creator lettering can sit close to the edge.
The illustrated toolbar includes Rotate, Change, Border and Preview. Change selects another image. Preview lets you inspect the pair. Tap Done when you have retained the intended layout. Work through A, B, C and D separately; identical scale settings will not necessarily suit four different photos.
If a crop cannot preserve the detail you want, changing the source or asking for photocard design help is more useful than increasing the copies. Every additional copy repeats the same layout.
Apply the common back with the right scope
Open one card’s Back and use Change to select shared-back. Position it and check which way it should read when the card turns over. Tap Copy Back. In the illustrated interface, the control then reads Copied.

Use Paste Here when you want the copied back on one selected card. Use Paste to all when every card in the list should receive it. For this four-front example, a greeting that suits A through D makes the common-back option straightforward. A member-specific name or a private message may call for separate backs instead.
After pasting, inspect every pair. Confirm that the fronts are still different, the backs contain the intended artwork and neither side is unexpectedly inverted. Tap Done. Copying a back changes artwork; it does not add physical cards or multiply the order.
Set five copies under each design
Use the plus and minus controls beneath each design until A, B, C and D each show five. Four designs at one copy each would make only four cards. Four designs at five copies make twenty. Check the editor’s total after removing a file or changing any count.

If Add to cart is unavailable, read the on-screen requirement and check the physical total, upload status and unfinished edits. Do not upload duplicate pictures merely to increase the count when the per-design copy controls can express what you want. Once the configured set is accepted, add it to the cart.
Treat the cart quantity as a separate check
In the demonstrated cart, the outer quantity is the number of complete configured sets. One set containing twenty cards gives twenty cards. Changing that outer quantity to two gives forty cards with the same configured mix. It does not mean two individual cards, and it does not change five copies into two copies under each design.

To change a front, a back or a design’s copies, use the cart pencil to reopen the configured item. Wait for the images to load, make the correction and tap Update. Then return to the cart and verify the result. Reopening the existing item avoids leaving an unwanted earlier version beside the corrected one.
Before paying, check the product and corners, all four pairs, the per-design copy counts and the number of sets. Review the current charges and delivery details at checkout. When the cards arrive, the concert gift packing guide helps turn the printed total into complete gifts.
